bdsmHARDware logo
Main Page --- Hardware Previous item Next item

Heavy D Rings

Heavy D rings for the leather and crafts trades
These are D rings which are formed by bending stock wire into the correct shape, and then applying a weld to the point where they join. The finish is applied after that process is complete. This differs from cast rings, which are poured as molten metal into a mold, and the resulting product is without a weld, and one solid piece. The welded wire rings (these) are by far both the most common, and the least expensive.

These have a myriad of uses, just about anywhere you need a D ring that will actually take some weight or abuse. Restraints, collars and the like.

We provide 2 measurements, the first, in inches, is the inner diameter of the ring, this is measured at the straight part of the D, and, therefore, is the size of the material which will fit correctly into the ring. This dimension is just slightly generous (a 2" ring may measure 2.05") so that there is no binding. The second is the thickness, in millimeters, of the material itself.

Separately we offer our brass D rings , our Light Weight D rings , and our cast D rings , which are much smaller and lighter.

Please see sizes available in the chart below.

In response to requests we are taking close up photos of all our hardware.
We are in the process of adding them as fast as possible.
If available, you may click on the small image next to the items in the table below to see a close up photo.

Select the item(s) you wish to order, indicating quantities, then press add to cart
  1-9 Pieces Packs of 10 Packs of 50 Packs of 100
Item /
Stock #
Click for
Close up
Thickness* Enter Quantity $ Each Enter Quantity $ per 10 Enter Quantity $ per 50 Enter Quantity $ per 100
3/4 inch heavy D ring thumbnail 4.7 mm
(0.290 each)

(0.250 each)

(0.195 each)
1 inch heavy D ring thumbnail 5.2 mm
(0.330 each)

(0.280 each)

(0.225 each)
Please note:

The balance of the items in this section are quite heavy, especially 100 packs,
and the constraints of our shopping cart (as nice as it is for our custom work, it does have limitations),
may seriously understimate your freight charges. We will ship the least expensive way, charging actual freight costs.
We always take advantage of flat and regional rate boxes to save you all we can,
but if you would like to know what the charges are before we proceed, we will be more than glad to email you the price.
Just ask for a freight quote first by using your comments box during checkout.
Remember, we NEVER charge your card before we actually ship. It is not charged at check out.

1 1/4"
6.2 mm
(0.390 each)

(0.340 each)

(0.285 each)
1 1/2"
1 1/2 inch heavy D ring thumbnail 6.2 mm
(0.470 each)

(0.410 each)

(0.345 each)
1 3/4"
1 3/4 inch heavy D ring thumbnail 6.5 mm
(0.550 each)

(0.480 each)

(0.410 each)
2 inch heavy D ring thumbnail 6.5 mm
(0.580 each)

(0.510 each)

(0.435 each)
3 inch heavy D ring thumbnail 9.5 mm
(2.870 each)

(2.480 each)

(2.090 each)
*A penny is 1.55mm thick, a mm is a little less than 1/16 of an inch. A nickel is almost exactly 2mm thick.

Go To Your Shopping Basket

This item is sold in "pre-packs".
This means that only full quantities of even 50 pieces receive the 50 piece price,
100 receive the 100 piece price, and so forth.

Hardware department   Tools department Dungeon hardware and accessories department

Main Page      Contact Us      Your Security      Pricing Information      Privacy Policy         Acceptable Use of Products      About Us