These are O rings which are formed by bending stock wire into the correct shape, and then applying a weld to the point where they join. The finish is applied after that process is complete. This differs from cast rings, which are poured as molten metal into a mold, and the resulting product is without a weld, and one solid piece. The welded wire rings (these) are by far both the most common, and the least expensive. These, like the welded D rings are designed to take pulling forces. Use them in slings, harnesses, etc. We provide 2 measurements, the first, in inches, is the inner diameter of the ring. The second is the thickness, in millimeters, of the material itself. Please see sizes and finishes available in the chart below . |